Tiles space effect picture window space house toilet toilet door bathroom waterproof bathroom tile bathroom door bathroom leak
Sealand is a trustworthy manufacturer of Coriolis mass flow meter, Coriolis mass flowmeter, Coriolis meter, Coriolis flow meter and Coriolis flowmeter, ATEX, CE & IECEx approved.
The flow meter size covers from DN03 to DN150, and bigger models are being developed. The main specification is as follows.
Model No.
Diameter
(mm)
Max. flow rate
(kg/min)
MWP.
(MPa)
Accuracy grade
(%)
Zero stability
(kg/h)
CG-03
03
6
4
0.1/ 0.2/ 0.5
0.012
CG-06
06
18
4
0.1/ 0.2/ 0.5
0.04
CG-15
15
50
25
0.1/ 0.2/ 0.5
0.12
CNG-20
20
120
25
0.1/ 0.2/ 0.5
0.36
CG-25
25
200
4
0.1/ 0.2/ 0.5
0.62
CG-40
40
500
4
0.1/ 0.2/ 0.5
1.60
CG-50
50
1000
4
0.1/ 0.2/ 0.5
2.38
CG-80
80
3000
4
0.1/ 0.2/ 0.5
7.05
CG-100
100
3600
4
0.1/ 0.2/ 0.5
12.00
CG-150
150
8000
4
0.1/ 0.2/ 0.5
50.00
Coriolis Mass Flow Meter, Coriolis Mass Flowmeter, Coriolis Meter, Coriolis Flow Meter, Coriolis Flowmeter Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com
Observing space Firstly, carefully observe the space and its facilities in the bathroom. Check whether the four sides of the door are close to the door frame and whether there is any special sound when the door is opened or closed. There are no water stains under the window sill. If there is any, the window may leak. Whether there is cracks on the ground, whether there is sanding phenomenon, there is no water seepage phenomenon in the brick seams, there are no water spots, cracks in the roof, if water stains, it is suspected that there is leakage. The occupants of the top-floor house should also carefully observe whether the top floor is leaking. In addition, special attention should be paid to whether there is paint peeling off or mold growth on the toilet ceiling.
Check the bathtub in the facility bathroom, flush toilets, washbasins and other facilities prone to cracks and cause leakage, cracks sometimes fine as hair, to remind consumers to carefully observe. Bathroom tile bricks must be solid, can not be uneven or cracks, empty drums and so on. There should be a floor drain in the bathroom. The direction of the slope must be correct and must not be tilted towards the entrance.
Knowing that “water†water is an essential element in the bathroom, understanding water-related conditions in the bathroom is therefore essential to verify the quality of the bathroom. It should be observed whether the toilet water is smooth, whether the sound of flushing is normal, and whether the flushing water tank is leaking. Waterproofing of the bathtub, washbasin and wall or cabinet interface is appropriate. Whether there is cement on the tile and downpipe has not been cleaned. Whether the pool faucet is properly installed, whether the water is flowing smoothly, whether the water outlet is smooth, and whether there is more construction waste left in the outlet.
In addition, the material of the water supply pipe and the quality of tap water are also important factors affecting the quality of the bathroom.
At present, most of the water supply pipes use copper pipes, and the copper pipes can be safely used for 50 years. Another unparalleled advantage is that copper can inhibit the growth of bacteria, purify water quality in pipes, increase the copper content in water, and benefit human health. Finally, remind consumers to observe whether the neighbors in your upstairs room are leaking water, so as not to cause inconvenience for your future life.
What is the key to bathroom acceptance
When consumers purchase a house, they often care about the quality of the house, because the quality of the house will directly affect your home life in the future. The quality of the bathroom plays an important role in the quality of the entire house. A slight oversight can bring endless trouble to your life. How to check the bathroom quality, let Chen Gong teach you a few tips to help you solve problems.