Three Tree Paint Villa Design Lacquer Paint Decorative Paint Welding Bolt, a kind of fastener consisting of head and Screw (cylinder with external thread), needs to be matched with nut to fasten and connect two parts with through hole. This type of connection is called bolt connection. If the nut is unscrewed from the bolt, the two parts can be separated, so the bolt connection is detachable. Welding Bolt,Weld Bolt,Welded Eye Bolt,Welded Screws Jiangsu Jiajie Special Screw Co., Ltd , https://www.jiajiebolts.com
The wall must be handled well before latex paint is applied. Otherwise, latex paint will cause serious problems such as shedding, cracking, and foaming. For the wall disposal method, see my post.) Nowadays, when many people are constructing, putty still uses 821 putty. In fact, 821 putty is very resistant to water. When the wall contains water, 821 putty will bubbling, causing latex paint to be large. The area is blistering and shedding. And the better the performance of the latex paint, the better the film formation and the more serious the problem. Therefore, when using latex paint, use the wall treatment process that I mentioned to dispose of the wall surface to prevent the above problems from appearing.
Should be evenly mixed, latex paint in construction. Especially when using colorful products, if the mixing is not uniform, when the color paste in the coating is not stable or the color paste is precipitated after being stored for a long time, the construction will cause the decoration to be dispelled and seriously affect the decorative effect.
How much water can be added and how much water can be added during construction of latex paint. Must strictly follow the manufacturer's regulations. Because some manufacturers in the design and development of latex paint, has fully taken into account the various needs of users, designed a variety of formulas, some latex paint in the construction without adding water, add water but damage the various properties of latex paint.
No matter which method above can achieve the desired effect, note that brush, roller and spray coating can be applied during construction. However, it is necessary to adjust the viscosity of the latex paint so that the viscosity can be easily applied during construction, and no brush mark is suitable after the brush is applied. Too much viscosity of the brush mark is obvious, the viscosity is low, it is easy to cause slag, poor hiding power and other ills.
What should pay attention to the construction of interior wall paint?
Timely water cleaning tool. The construction is completed.