The wooden floor looks high-end atmosphere, but it is not very well maintained. There are many consumers who do not pay much attention, dragging the cabinets or children do not pay attention, scratching and scratching the beloved wooden floor. Every time I see the damaged floor, I feel pain and I don't know how to remedy it. Next Xiaobian teach you some floor repair methods, you can try. [Solid wood floor repair method] 1, floor essential oil If there is a lighter scratch on the solid wood floor, it is recommended to use floor oil to treat it. The floor oil can protect the floor, so that slight scratches will not be darkened. Start work: Find the scratched and worn wooden floor. For the worn wooden floor, first grind the surface with wet sandpaper with water and sandpaper, but do not grind too deeply. Do not wet the wooden surface and then wipe it with a dry cloth. If you want to re-play the crystal, you must first completely grind the old crystal, absorb the dust of the net wood dust, wipe the old wooden duster completely with a damp cloth, and after the floor is completely dry, apply the crystal oil to the paint evenly. On this floor, it will take only a few hours to completely dry out; if air bubbles appear after repair, it can be lightly rubbed off with young sandpaper to achieve better results in dry weather. If the paint film on the surface of the solid wood floor is not bad, only a few scratch marks can be directly polished with the polishing wax after cleaning the floor. Polishing wax is mainly to protect the gloss of the floor, so that the surface of the solid wood floor becomes smooth, so that there will be no deeper damage to the scratched place. 3, paint If the scratches on the hardwood floor are serious and the floor paint film is damaged or white, use 400-grit water-sandpaper, grind the soapy water and wipe it clean. After the paint is dry, apply a complementary color. After the color is dry, apply a paint and dry it for 24 hours. , Polish with a 400-grit water sandpaper, then rub the floor wax. 4, professional maintenance personnel If the hardwood floor is severely scratched, it is advisable to ask a special person's maintenance staff to refurbish or replace the solid wood floor. [Solid wood floor maintenance matters needing attention] 1. When the floor has just been laid, remember to keep the circulation of indoor air constantly; 2. Overweight items should be placed in a stable manner, and furniture or hard objects cannot be pushed or pulled by force; 3, the use of water can not be soaked in the floor, if any, should be promptly dry with a dry mop to dry the floor; 4, keep the floor dry and clean; 5. Use a special floor cleaner to remove dirt. Do not use damaging items for cleaning. Summary: The above is an introduction to some methods of floor repair by Xiaobian, and I hope to be helpful to everyone. Kindergarten non-slip floor living room floor tile heating floor how much a square office floor Gerson floor prices Nylon Flap Wheels Surface Conditioning Nylon Flap Disc
High grinding efficiency, can self-sharpening, good heat dissipation. Suitable for irregular curved surface, good heat dissipation, do not burn the workpiece, can grind out the fine sand grain. Used in polishing of metallurgy, machinery, light industry, wood products, furniture, metal, plastic, melamine, building materials, automobiles, leather, textile and other industries.
We distributes and wholesales various brands of Bonded Abrasives , Abrasive Sanding Disc, Cutting Wheels , Abrasive Flap Disc, Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , and Surface Conditioning Product etc, and enjoy a high position among consumers.
Nylon Flap Wheels,3m buffing,Non Woven Wheel,Non Woven Abrasive Wheel,Nylon Abrasive Polishing Wheel Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com
2, polishing wax 
Removing materials, edges, chamferings, burrs and rust, trimming and dressing of weld joints, and surface cleaning and finishing
The abrasive material structure is fine and uniform, and has good abrasion resistance, so as to ensure that the parts to be ground
have higher size, shape accuracy and finer surface roughness
Features:
