Small Thin Round Magnets,Small Round Flat Magnet,Round Thin Magnet Jammymag Electronic S&T Co., Ltd. , http://www.xmmagnet.com
HZ-093 CNC track plate engraving machine is used together with MKB7025 CNC track plate special grinding machine, which is specially used for engraving of track plate coding. The track plate engraving machine can be used to transfer the engraving process of the track plate originally required in the track plate grinder to a station outside the track plate grinder, so that the engraving machine can carry out engraving while the engraving machine can carry out the next piece. Processing of track panels. The main purpose is to improve the processing efficiency of the existing track plate grinding machine, so that the number of track plates with average daily grinding is significantly improved. According to preliminary estimates, this way of working can at least shorten the processing time of the track plate inside the MKB7025 grinding machine by about 2 minutes. With 100 pieces of daily production, it can save 200 minutes. In the 200 minutes of extrusion, the track plate grinding machine will be It can process more than ten track plates. Obviously, using this engraving machine can greatly improve the processing efficiency of the track plate grinding machine, and at the same time improve the comprehensive economic benefits of the machine tool. Sometimes seemingly simple process improvements are also very useful and can achieve better results.
In order to reduce the manufacturing cost of the machine tool and shorten the manufacturing cycle, the main large parts of the machine tool are made of steel plate welded parts, which has accumulated experience for the future use of steel plate welding parts technology by Hangzhou Machine Tool Group Co., Ltd. The machine adopts Siemens 802C numerical control system to realize three-axis numerical control and has three-axis linkage function. The longitudinal (X-axis) motion is a full-column movement structure, and the lateral direction (Y-axis) is the lateral movement of the electric spindle following the transverse carriage, which is the moving structure of the grinding head as we usually talk about, and the Z-axis is the vertical feed motion. The X, Y and Z axes are all driven by a servo motor to drive the ball screw structure. The guide rails are all linear rolling guides, which are stable in operation and high in feed sensitivity. According to the feedback from the track board, the machine tool is used normally, the lettering is clear, and the production beat meets the needs of the user.
Hangji successfully developed CNC track plate engraving machine
Recently, Hangzhou Machine Tool Group Co., Ltd. has completed 5 HZ-093 CNC track plate engraving machines and provided them to users.