Furniture purchase is the final step of the decoration, and it is also a necessary process. When purchasing furniture, it is not just to look at its color, style, and the most important thing is to look at its quality, then how can we buy furniture with good quality? ? First, check whether the installation of accessories is reasonable For example, check the door lock switch is ineffective; large cabinets should be equipped with three hidden hinges, and some can only install two; the three screws, and some of the cuts, only one screw, use will be lost. Second, mirror furniture to check the back Select furniture with mirrors, such as dressers, mirrors, and mirrors. Pay attention to whether or not the mirror is distorted. Check if there is liner and back plate at the mercury at the back of the mirror. There is no back plate. Qualified, no paper or line, otherwise it will wear away mercury. Third, sofa, soft bed to try to sit When picking up sofas and soft beds, it should be noted that the surface should be flat and not uneven; soft and hard should be uniform, but not hard and soft; soft and firm should be moderate, neither too hard nor too soft. The method of selection is to sit and sit in a hand. If the spring does not ring, the spring will not ring. If the spring is not arranged properly, the spring will cause the spring to make a spring. Second, we should also pay attention to whether the quilting line breaks, jumpers, and the density of the corner horn tooth is reasonable. Fourth, strict inspection of veneer furniture Whether wood veneer, PVC or pre-painted paper, should pay attention to whether the skin is smooth, with or without bulging, blistering, patchwork seams. When checking, you must look at the light and you cannot see it without flashing. Ash veneer veneer furniture is relatively easy to damage, generally only two years. For wood veneers, veneer veneers are better than peeled ones. The method of identifying the two is to look at the pattern of the wood. The veneer lumber has a straight and dense texture, and the peeled veneer is curved and sparse. Particle board veneer furniture, the landing part must be edged, without the edge of the board will absorb moisture, and rise and damage. General veneer furniture corners are easy to tilt up. When you pick, you can use your hand to pick up the corners. If you pick them up, you have problems with the glue. Fifth, various materials have their own advantages The texture and texture of the material determine the appearance of the product. Wood is a natural material with natural and beautiful texture, vivid image, good hand feeling, and easy processing and coloring. It is the best material for producing furniture. Plastics and their synthetic materials have the characteristics of simulating the texture of various natural materials, and have good coloring properties, but they are prone to ageing and are prone to thermal deformation. Therefore, the production of furniture using them has limited service life and application range. The moisture content of furniture must not exceed 12%, the moisture content is high, and the wood is easy to warp and deform. When the general consumer purchases, there is no test instrument. You can use the hand-touch method to touch the underside or inside of the furniture without painting. If you feel damp, the moisture content is at least 50% and you cannot use it at all. Another way is to sprinkle a little water on the unpainted part of the wood. If you pick it up slowly or not, it means that the moisture content is high. Seventh, check whether the furniture material is reasonable Different furniture, surface materials are different. For example, the legs of tables, chairs, and cabinets require hardwood. They are firmer and can bear weight. The internal materials can be made of other materials. The thickness of a large wardrobe leg is 2.5 cm. It is clumsy when it is too thick, and it is thin and easy to bend. Deformation; kitchen, bathroom cabinets can not be made of fiberboard, but should use plywood, because the fiberboard will swell with water, damage; table should be resistant to washing. Furniture purchase
The 20V Cordless Circular Saw is Perfect for Cutting Wood, especially on Bevel Cutting and Straight Cutting, compared to the Jig Saw.
The 20V Cordless Wood Working Circular Saw is convenient to use at anywhere, wireless power supply, 4Ah and 2Ah Battery is rechargeable.
4Ah battery can cut around 30m wood.
This Cordless Power Tool is designed friendly, can be used by Left or Right Hand.
It is a cordless wood cutting power tools that users feels much better, compared to jig saw.
The Cordless Wood Working Power Saw with single speed 4000rpm, Laser Function, Bevel Cutting 45°, 55mm cutting depth at 90 Degree, 36 cutting depth at 45 Degree.
The Cordless Circular Saw With a dust blower for max cut -line visibility.
The Cordless Wood Cutting Power Tools with protection button for your safety, soft rubber handle for comfortable use.
Cordless Circular Saws,Mini Cordless Circular Saws,Cordless Hand-held Circular Saws,Cordless Circular Saw with Battery and Charger Ningbo Brace Power Tools Co., Ltd , https://www.bracepowertools.com
Master these 10 tips and quality furniture to move home!
1 2 Next> Total 2 Page
Page to page