"I read less, you do not lie to me", for the decoration of this matter, not only have to worry about the quality of decoration, but also the embankment do not be the decoration company and decoration workers "pit." A lot of decoration workers are outsourced by the decoration company. Occasionally, the quality of jobs is uneven, and the phenomenon of cutting corners and materials is frequent, especially hydropower reform. Today we will look at the jerry-building cuts in hydropower projects. First, please don't save money for me. In the formal construction of waterways, various types of small pipe fittings such as bridge bends, straight throughs, and tees need to be used to realize the specification of pipe laying. In the hands of bad construction teams, it is very easy for water pipelines to turn around without using interfaces. Intersections with wire ducts do not use bridge bends. Although this will save time, it will have a great impact on the quality of the pipeline and its subsequent construction. Second, the "overload" hazardous wires also do so According to the electrician's construction specification, the section of conductors placed shall not exceed 30% to 40% of the pipe. In order to steal work, some construction masters often put multiple wires into the same pipe. This can easily cause insufficient gaps in the tube, so that the heat generated when the wire passes through a large current in the line tube cannot be dissipated, and thus there is a risk of aging and fire. Third, are you really confused? Hot water pipes need to withstand thermal expansion and contraction, and the performance requirements for materials such as high temperature resistance are higher than those of cold water pipes. Hot water pipes are generally more expensive than cold water pipes. Generally blue is a cold water pipe and red is a hot water pipe. In the construction, all hot water pipes can be used, or normal hot and cold water pipes can be used. However, some unscrupulous construction teams may use cold water pipes as hot water pipes. Although this is not a problem at the moment, it is prone to leakage of cold water pipes in later stages. Fourth, want to pass the box must be picked up When the wires are laid, there may be cases where they are not long enough and need to be wired. Some construction teams will directly insert the tubes without passing through the box after the line is completed. To know that the interface is often the most prone to problems, the practice of keeping the thread in the tube will make repairs very difficult when problems arise later. Fifth, do not learn to "naked" When the supervisor inspects the circuit, after discovering that the circuit of the top lighting of the restaurant has been changed, the newly laid wire is buried directly on the top surface without the protection of the PVC sleeve. The insulation of a long wire is easily corroded and a short circuit can occur. Wires are laid on the wall surface and must be threaded into the PVC casing for protection. If it is the top surface or the load-bearing wall cannot be grooved, the yellow wax tube must be used to protect the wires in order to bury the wires. 6. What to do if accidents happen on the same bed? In the construction, strong electricity (such as lighting wires) and weak electricity (such as telephone lines and network cables) are placed in a pipe or box, and a pipe or box is placed less, saving time and labor. However, in doing so, there are interferences when making a call or surfing the Internet. At the same time, too much threading in the same pipe also creates a risk of fire. Seven, milk tea, I only want to music the United States “Reducing materials†does not only mean using less materials, but also using inferior materials instead of high-quality materials to earn the difference. In the waterway reconstruction, the pipeline is less concerned because the owners will pay more attention to it. However, due to the small size of the pipe fittings and the large number of pipes used, the owners did not pay attention. When they encountered bad decoration companies or construction workers, it was easy to connect the water pipes with poor fitting pipes. To know this approach, it can easily lead to failure at the interface. Hydroelectricity reconstruction common jerking means
MOL File:82-45-1.mol
1-Amino Anthraquinone Properties
Melting point:253-255 °C(lit.)
Boiling point:364.52°C (rough estimate)
Density 1.1814 (rough estimate)
refractive index 1.4700 (estimate)
storage temp. Store below +30°C.
solubility Soluble in alcohol, benzene, chlroform, ether, glacial acetic acid, HCl
Colour Index 37275
Merck 14,417
BRN 396360
Stability:Stable. Incompatible with acids, acid chlorides, acid anhydrides, chloroformates, strong oxidizing agents.
CAS DataBase Reference82-45-1(CAS DataBase Reference)
NIST Chemistry Reference1-Aminoanthraquinone(82-45-1)
EPA Substance Registry System9, 10-Anthracenedione , 1-amino-(82-45-1)
1-Amino anthraquinone Chemical Properties,Uses,Production
Chemical Properties
deep brown crystalline powder
Safety Profile
Moderately toxic by intraperitoneal route. An eye irritant. Questionable carcinogen with experimental tumorigenic data. Mutation data reported. When heated to decomposition it emits toxic NO,. See also AMINES
1-Amino anthraquinone Preparation Products And Raw materials
Raw materials
Nicotinic acid Sodium dithionite 1-Anthraquinonesulfonic acid Sodium sulfide Sodium sulfite Anthraquinone Metanilic acid Nitric acid Sulfuric acid
Preparation Products
VAT BLACK 27 Vat Green 3 Disperse Red 146 1-Amino-2,4-dibromoanthraquinone Disperse Red 127 Disperse Red 53 Vat Yellow 33 Vat Black 9 Vat Green 8 Vat Black 8 Vat Black 25 1-amino-4-hydroxy-2-(2-methoxyethoxy)Anthraquinone 1-amino-4-hydroxy-2-[(6-hydroxyhexyl)oxy]anthraquinone Bromaminic acid Disperse Red 60 C.I. 60752 Vat Grey M
Specifications
Melting Point
252°C to 255°C
CAS
82-45-1
MDL Number
MFCD00001213
Merck Index
14,417
Solubility
Information
Soluble in
alcohol, benzene, chlroform, ether, glacial acetic acid, HCl
SMILES
C1=CC=C2C(=C1)C(=O)C3=C(C2=O)C(=CC=C3)N
Molecular
Weight (g/mol)
223.231
Formula Weight
223.23
Chemical Name
or Material
1-AMINOANTHRAQUINONE
Molecular
Formula
C14H9NO2
Beilstein
396360
Synonym
1-aminoanthraquinone ,
diazo fast red al, anthraquinone, 1-amino, 1-amino anthraquinone,
1-aminoanthrachinon, 1-amino-anthraquinone, 9,10-anthracenedione, 1-amino,
alpha-Aminoanthraquinone, 1-Amino-9 , 10-anthraquinone ,
1-amino-9,10-anthracenedione
InChI Key
KHUFHLFHOQVFGB-UHFFFAOYSA-N
IUPAC Name
1-aminoanthracene-9 , 10-dione
Percent Purity
97%
1-Aminoanthraquinone 1-AMINOANTHRAQUINONE,82-45-1,1-aminoanthracene-9,10-dione,Diazo Fast Red AL,Anthraquinone 1-amino-,1-Amino anthraquinone Jinan Forever Chemical Co., Ltd. , https://www.jinanforever.com
Common water and electricity cut-off phenomenon read less do not lie to me
CAS No. 82-45-1
Chemical Name:1-Amino anthraquinone
Synonyms1AAQ;CI 37275; Fast Red AL ;diazofastredal;Smoke Orange G; Diazo Fast Red AL ;1-Aminoanthrachinon;1-AMINOANTHRAQUIONE; 1-amino- anthraquinon;1-Aminoanthraquinone
CBNumber:CB9435391
Molecular Formula: C14H9NO2
Formula Weight:223.23